NETVANTA E1 W/ G.703 DROP NETWORK INTERFACE MODULE (NIM) P/N 1200878L1
For more detailed documentation, visit us online at
www.adtran.com
Quick Start Guide
Quick Start Guide, 61200878L1-13B, February 2004
ADTRAN Technical Support (+1-256-963-8716)
© 2004 ADTRAN, All Rights Reserved
S
PECIFICATIONS
E1/FE1
Interface
Line Rate: 2.048 Mbps +/- 50 PPM
Line Code: AMI or HDB3
Framing: FAS with optional CRC-4
FE1 Line Rate: Timeslot, channelized
(in multiples of 64 kbps)
Receiver Sensitivity: -30 dB
Connector: RJ-48C
G.703
Interface
Line Interface: Per ITU-T G.703
Receiver Sensitivity:-30 dB
Line Rate: 2.048 Mbps, +/- 50 PPM
Capacity: 1 to 31 timeslots
If timeslot 16 signaling is used on the drop port, a
maximum of 15 timeslots can be mapped to router
(1-15 or 17-31).
Line Code: AMI or HDB3
Framing: FAS with Optional CRC-4
Connector: RJ-48C
Clock Source
Network, internal, and through
Diagnostics
Test pattern generation and detection
(QRSS, 511)
Network loopbacks
Alarm generation and detection
Network performance data (15 minutes and 24 hours)
WAN-E1
G.703
DBU
I
NSTALLATION
I
NSTRUCTIONS
1. Remove power from the unit.
2. Slide the Network Interface Module (NIM) into the
option slot until the NIM is firmly seated against the
front of the chassis.
3. Secure the pins at both edges of the NIM.
4. Connect the cables to the associated device(s).
5. Complete the installation of the base unit.
6. Restore power to the unit.
WAN-E1 N
ETWORK
(RJ-48C) C
ONNECTION
P
INOUT
Pin
Name
Description
1
R1
Receive data from the network
2
T1
Receive data from the network
3
—
Unused
4
R
Transmit data toward the network
5
T
Transmit data toward the network
6-8
—
Unused
G.703 (RJ-48C) C
ONNECTION
P
INOUT
Pin
Name
Description
1
R
Transmit data toward the DTE
2
T
Transmit data toward the DTE
3
—
Unused
4
R1
Receive data from the DTE
5
T1
Receive data from the DTE
6-8
—
Unused
