background image

REVISION DATE

20200320

DOCUMENT NUMBER

TERMS OF USE:

 Automotive Data Solutions Inc. (“ADS”) products are strictly intended for installation by 

Certified Technicians who are employed by a registered business specialized in the installation of auto-

motive aftermarket electronics products. Prior to beginning installation of an ADS product in a vehicle, 

it is the Certified Technician’s responsibility to review the most current Product Guide, Install Guide 

and vehicle-specific notes available in Weblink®. ADS is not responsible for any damages whatsoever, 

including but not limited to any consequential damages, incidental damages, damages for loss of time, 

loss of earnings, loss of profit, commercial loss, loss of economic opportunity and the like that may or 

may not have resulted from the use, misuse, improper installation or operation of its products. ADS 

reserves itself the right to suspend any Weblink® account without notice and decline to offer technical 

support to non-Certified Technicians, non-compliant Certified Technicians or end users.

BEFORE INSTALLATION

1- Connect module to computer

2- Login to Weblink account

3- Flash firmware to module (module is not preloaded with firmware)

4- Use accessories accordingly (accessories are sold separately)

Patent No. US 8,856,780 CA 2759622

INSTALL GUIDE

CS-CH(RS)-CH4-[OL-RS-CH4]-EN

HARDWARE

OL-RS-CH4

ACCESSORIES

OL-LOADER (REQUIRED)

CRIMESTOPPER REVOSTART RF-KIT (OPTIONAL)

 

 

FIRMWARE

CS-CH(RS)-CH4-[OL-RS-CH4]

www.omegaweblink.com

Automotive Data Solutions Inc. © 2020

70084

Summary of Contents for OL-RS-CH4





















Reviews: