Problem
Possible Causes
Action to take
Inverter is not starting when connected
to the mains voltage supply
1. Line cord plug is loose.
2. Breaker is broken.
3. Wall socket is damaged.
1. Check the line cord plug.
2. Replace the breaker.
3. Check wall socket with a lamp
.
Output voltage is present,
inverter emits continuous beep sound,
the yellow LED flashes every 0.5 seconds
Inverter is overloaded
Turn off inverter and unplug excessive loads.
Inverter emits beep sound, battery
capacity indicator flickers
Low battery
1. Charge batteries.
2. Replace batteries.
3. Call the service.
Inverter does not provide expected
backup time
1.Excessive loads connected.
2.Battery is weak and cannot
provide enough energy.
Do not draw any current from the inverter. Leave the
the device plugged in to the mains voltage for 10
hours. Then test it again. If inverter still can not provide
expected backup time, battery should be replaced.
Button on front panel does not work
1.The CPU inside inverter
is not running correctly.
2.Button is damaged.
Unplug line cord and battery terminals from the
inverter to let it shut down automatically. Then, plug in
line cord and battery again. If the button still fails,
please call the service.
Inverter cannot turn on the battery mode
1. Battery polarity is wrong.
2. Battery is overcharged.
3. Battery is discharged.
4. Inverter fault.
1. Check battery and connections.
2. Check battery voltage using a voltmeter.
3. Connect the inverter to mains voltage and charge
the battery.
4. Call the service.
1
4
MODEL:
CO-SinusUPS-600W-LCD
U
SER
M
ANUAL
Please read and save this manual!
This manual is an important instruction that you should follow during
installation and maintenance of the inverter. Please read all instructions
before using the equipment and save this document for future reference.
CO-sinusUPS-600W-LCD-manual-R3, 20.03.10
6. S
PECIFICATION
Output Power
600VA/500W, 800VA/600W,
950VA/800W, 1200VA/1000W
Input Voltage range/ Frequency
145 ÷ 270VAC ± 5VAC (UPS mode)
100 ÷ 290VAC ± 5VAC (Inverter mode)/ 45 ÷ 65Hz
Output Voltage Range (AC mode)
203VAC ÷ 238VAC ± 5VAC (UPS mode)
150VAC ÷ 255VAC ± 5VAC (Inverter mode)
Output Voltage and Frequency (Battery mode)
220 ± 5VAC, 50Hz ± 0.5Hz
Transfer Time
max. 10ms
Battery Voltage
12VDC or 24VDC
Charging Current
10A/20A (selecetable)
Output Waveform (Battery mode)
Sine Wave
Operation Temperature
0 ÷ 40°C
Operation Humidity
20 ÷ 90%
Unit dimension
290 x 257 x 123mm
Net weight
10.8kg
7.TROUBLESHOOTING
PURE SINE WAVE INVERTER UPS
A
PPLICATIONS
:
Central heating and hot water systems,
Off-grid solar systems, home electronics, WI-FI,
yachts, campers etc.
CO-sinusUPS-500W/xxx-LCD
CO-sinusUPS-600W/xxx-LCD
CO-sinusUPS-800W/xxx-LCD
CO-sinusUPS-1000W/xxx-LCD
xxx = 12V,24V
