background image

Addonics

T E C H N O L O G I E S

Z USB3.0 /  eSATA Combo Drive Enclosure
for SATA or IDE Hard drive or Optical drive

Model: ZESSIU3CS

User’s Guide

FCC Warning Statement

This equipment has been tested and found to comply with the limits for a cl ass B digital 
device pursuant to Part 15 of the FCC rules.  These limits are designed to provide 
reasonable protection against harmful interference in a residential installation.  This 
equipment generates, uses and can radiate radio frequency energy.  If n ot installed and 
used in accordance with the instructions, it may cause harmful interference to radio 
communications.  However, there is no guarantee that interference will not occur in a 
particular installation.  If the equipment does cause harmful interf erence to radio or 
television reception, which can be determined by turning the equipment on and off, the user 
is encouraged to try and correct the interference by one or more of the following 
suggestions.
Reorient or relocate the receiving antenna
Increase the distance between the equipment and the receiver 
Connect the equipment to a different power outlet other than the one where receiver is 
connected
Consult a certified television or radio technician

TECHNICAL SUPPORT

Phone:

408-453-6212

Hours:

8:30 am - 6:00 pm PST

Email:

http://www.addonics.com/support/query/

Enclosure Overview

Removing the front panel

You can remove the front panel of the enclosure to 
access the drive drawer of the optical drive.

Step 1

Loosen the two screws from the rear panel.  Pull out the interior tray from the 
enclosure.

Step 2

A.

Installing a 3.5” SATA hard drive

Slide in the 3.5” 
SATA hard drive
and secure on the 
tray using screws.

Screw 1

Screw 2

Power
Connector

Switch

Fan

eSATA Port

SATA hard 
drive

Reviews: