background image

e-sphyg

TM

Digital Aneroid

AMERICAN DIAGNOSTIC CORPORATION

FOR QUESTIONS, COMMENTS, OR SUGGESTIONS

CALL TOLL FREE:  1-800-ADC-2670

®

Care and

Maintenance

To Register Your Product, visit us at www.adctoday.com

and follow the links

LIMITED WARRANTY

Limited Warranty

American Diagnostic Corporation (ADC) warrants its products against defects in materials and
workmanship under normal use and service as follows:
1. Warranty service extends to the original retail purchaser only and commences with the date

of delivery.

2. The entire sphygmomanometer is warranted for one year.
3. The manometer is warranted to remain accurate to ±3mmHg over its full range when compared 

to a reference standard for life.

What is Covered: 

Repair, or replacement of parts, and labor.

What is not covered:

Transportation charges to and from ADC.  Damages caused by abuse, misuse,

accident, or negligence. Incidental, special, or consequential damages. Some states do not allow the
exclusion or limitation of incidental, special, or consequential damages, so this limitation may not
apply to you.

To Obtain Warranty Service:

Send item(s) postage paid to ADC, Attn: Service Dept., 55 Commerce Dr.,

Hauppauge, NY 11788.  Please include your name and address, daytime phone no., proof of purchase,
a brief note explaining the problem, and $2.00 to cover the cost of return shipping and handling.

Implied Warranty:

Any implied warranty shall be limited in duration to the terms of this warranty and

in no case beyond the original selling price (except where prohibited by law). This  warranty  gives
you  specific legal rights and  you  may  have other rights which vary from state to state.

®

AMERICAN DIAGNOSTIC CORPORATION

55 Commerce Drive • Hauppauge, NY 11788

www.adctoday.com

IB p/n 9359-00 rev 1                                                                                         Printed in the U.S.A.

NOTE - 

To obtain the greatest accuracy from your blood pressure instrument, it is

recommended that the instrument be used within a temperature range of 50°F (10°C)

to 104°F (40°C), with a relative humidity range of 40-80% (non-condensing).

 

 

 

 

 

 

 

  

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Summary of Contents for Diagnostix e-sphyg







Reviews: