Parts List
PART NUMBER
UP163S (SURFACE)
UP163I (IN GROUND)
UP163F (FOOTING)
DESCRIPTION
206526
1
1
1
RECUMBENT CYCLE
206699
1
1
1
BASE COVER
206467
0
1
0
FOOTBUCK WELD ASS'Y
206517
1
0
0
206518
0
0
1
206519
0
1
0
135038*
0
2
0
1/2" ANCHOR ROD
801533*
0
4
0
3/4" x 2" HEX HEAD CAP SCREW
206358*
4
0
0
3/4" WEDGE ANCHOR
800001*
0
0
4
3/4" ANCHOR BOLT
804058*
0
4
8
3/4" HEX NUT
817420*
0
4
8
3/4" FLATWASHER (2" O.D.)
817354*
4
4
4
3/4" LOCKWASHER
HARDWARE COMPLETE
HARDWARE COMPLETE
HARDWARE COMPLETE
Issued/Revised: 08/29/13
UP163F RECUMBENT CYCLE (FOOTING)
FitTech
800.458.5872
www.actionfitoutdoors.com
1
ActionFit
UP163I RECUMBENT CYCLE (IN GROUND)
UP163S RECUMBENT CYCLE (SURFACE)
*Items listed below Hardware Complete line are included with Hardware Complete Number
Warning: During Installation, Hardware And Small Parts Are Choking Hazards For Young Children. Store
Unused Parts Appropriately Until Assembly Is Completed. Once Assembly Is Completed, Remove Any
Unused Parts From The Play Environment And Dispose/Save Them In A Secure Location. Any bolt end
protruding more than two full threads beyond the face of the nut causes risk of clothing entanglement.
Promptly cut-off flush, file smooth, and treat to prevent corrosion.
Unless Otherwise Specified, All Units of Measure are Each
Note: Peen Tee-Nuts and Flatwashers to match radius of pipe after assembly is complete.
Note: Loctite (supplied by others) should be used on any non-patch hardware.
