![background image](http://html1.mh-extra.com/html/acis/ad-300i/ad-300i_instruction-manual_458056001.webp)
FUNCTION SETTINGS
1.
Press [ON/OFF] to turn on the scale, the display will show flash digits and
then --------,
press
[PRINT]
, the display will show
b xxx BAU
value (press
[UNIT]
to select among 1200, 2400, 4800, 9600), our default setting is 9600.
Press
[ZERO]
to enter Parity mode, the display will show
P XXX PAR
, press
[UNIT] to select odd,even,none (odd stands for 7 data bits with odd parity, even
stands for 7 data bits with even parity, none stands for 8 data bit without parity)our
default setting is none.
Press
[ZERO]
to enter Print mode, the display will show n
xxx Mod
, press [UNIT]
to select ON, OFF, KEY, STB (OFF stands for serial data output disabled, KEY
stands for demand mode by press
[PRINT], STB
stands for automatic print when
scale is stable, ON stands for continuous print, our default setting is STB. Press
[ZERO] again to return to weighing mode.
2. Press [ON/OFF] to turn on the scale, the display will show flash digits and
then ----------,
press
[UNIT]
to enter unit selecting function, the display will show
ON X (X stands for the units: g, oz, lb, dwt…tola...) press
[UNIT]
to select ON
(activate the selected unit) or OFF (inactivate the selected unit), press [ZERO] again
to return to weighing mode.
3. Switch the power to “ON”
and than press [ON/OFF] to turn on the scale
。
The
display shows F-E-9 to 0 and than “- - - - - - -”|
,
press [PCS] key to enter ZERO
track function setting
,
display shows
ZRD x.xd
,
press [UNIT] key to select ZERO
track value
(
0.0d-0.5d-1.0d-1.5d-2.0d
)
; press[ZERO]key to enter ZERO track
function setting
,
display shows
ZRT x.xd
,
press [UNIT] key to select ZERO track
time
(
05. to 4.0 seconds; press [ZERO] key to enter ZERO setting
,
display shows
RZD XXX
, press [UNIT] key to select ZERO value
(
0.8d-1.8d-2.8d-3.8d
)
;press
[ZERO] key to enter
FIL
setting, press [UNIT] key to select filter range amend
(0-1-2-3-4-5-6-7),”2”is default setting; press [ZERO] key to select zero range when
turn on the scale, press [UNIT] key to select percent (
PZR
2, PZR 5, PZR 10.
PZR 20); press [ZERO] key to set zero range, press [UNIT] key to select percent
(
KZR
3,4,5,10); press [ZERO] key to set
TARE range
, press [UNIT] key select
percent (
KTR
50 or KTR 100); press [ZERO] key to enter overload protection
setting, press [UNIT] key to select overload protection value (9d OVR-1 OVR-2
OVR-10 OVR); press [ZERO] key to set beep function, press [UNIT] key to choose
turn on or turn off the beep, “b2 ON” means activate the beep, “b2 OFF” means
inactivate the beep; press [ZERO] key to unite the function of TARE and ZREO,
press [UNIT] to switch between them. “ZT ON” means unite function activate,
“ZT OFF” means unite function inactivate. press [ZERO] key to enter auto off
function setting
,
display shows A xxx
,
press [UNIT] key to select auto off time
(
3,5,10,off
)
. Press
[ZERO]
to select backlight, the display will show L Aut, press
[UNIT] to select
X
value (
X
stands for AUT, OFF, ON), OFF stands for inactivate
backlight function, ON stands for the backlight is always make function. AUTO
stands for auto backlight.
4. Press
[ZERO]
to return to weighing mode.