ACER Group
Springwood Industrial, Inc.
Klim Industrial, Inc.
1062 N. Kraemer Place
244 N. Randolphville Road
Anaheim, CA 92806
Piscataway, NJ 08854
Tel: 714-632-9701 Fax: 714-632-9730
Tel: 732-752-9100 Fax: 732-752-9101
http://www.acergroup.com
http://www.acergroup.com
PROCEDURE TO SETUP AGS 2040AHD SURFACE GRINDER
1.
Unwrap the machine and check out machine for any physical damage. If so,
report to your dealer as soon as possible. Touch-up paint is inside the toolbox.
Use it as needed.
2.
Turn vertical handwheel counterclockwise (spindle up) to take out spindle support
block. Swing out control panel out when removing spindle support block.
3.
Move machine to appropriate location. Put leveling screw, nut and pad on
machine (follow picture)
Spindle support
block
Control
support
Leveling screw,
nut and pad
