Accel FX Power Source 10M, User Manual

Page: 1 / 3

INPUT:

Detachable 18V AC power adaptor
Country Input AC Volt
North America 120V/60Hz
OUTPUTs:

All DC Outputs are regulated

Over current protection on each output
Output DC Voltage Current
1-7 9V 100mA
8 9V 500mA
9 12V 100mA
10 18V 100mA
Warranty
Limited 2 Year Warranty
This warranty covers any defects or malfunctions in your new Accel FX Power Source 10M
Power Supply. This a 2 year warranty for the original registered purchaser. Accel will fix or
replace any defective units with the first 2 years from the purchase date. Fixing or replacing
the unit will be at Accels discretion. Any problem that is caused by abuse, misuse, or an act of
God (such as a flood) are not covered. In order to be eligible for service under this warranty
you must return the warranty registration card attached below within 30 days of purchasing
the aid.
If something goes wrong with your Accel Power Source 6 Power Supply, email us at
support@accelaudio.com
This warranty gives you specific legal rights, and you may also have other rights which vary
from state to state.
4
USER’S MANUAL
Table of Contents
What’s Included
What’s Included………………………...1 (1) Accel FX Power Source 10M Power Supply
Introduction
& General Information…..1 (1) User Manual
Warnings & Cautions………………… .2 (1) 18V adaptor
Component Description and (10) Negative Center Output Cables
Dimensional Drawing
…………………. .3 (2) Reverse Polarity Cables
Power Supply Mounting Instructions….3
Specifications……………………………4
Warranty………………………………….4
Introduction:
Your Accel ”FX Power Source 10M” Ten Output Power Supply is designed with a high efficiency
transformer. Each output is fully regulated and filtered with over voltage protection.
Equipped with an on/off switch and our easy mount, mounting wings, adds an extra level of
convenience not found on similar power supplies.
The FX Power Source 10M , powers 9V, 12V & 18V effects pedals.
Outputs 1-7: 9V@ 100 mA powers the majority of the pedals on the market.
Output 8: 9V @ 500mA powers the 9V pedals and switchers that require more mA’s
Output 9: 12V @ 100mA powers most of your favorite 12V effects.
Output 10: 18V@ 100Ma powers most of your favorite 18V effects.
Read all warnings, cautions and operating instructions before using this product.
1