background image

U

se

 • M

aintenance

 M

anUal

Warning:

 

This manual must be read before 
installation or use of the unit.

 

 

Winter storage or long time 

storage. 

Drain all water out of the 

pump.  Flush the pressure washer 
with a 50% antifreeze solution, 
and relieve the pressure.  Flush the 
pressure washer before you use it 
again to remove the antifreeze.

AR620 & AR630

 Brass

Important

Notice:

A.R. North America

Attn: Pressure Washer Warranty Department

140 - 81st Avenue NE

Fridley, MN  55432

This product is under warranty to the original retail consumer against 
defects in material and workmanship for a period of 1 (one) year on 
machine, 90 days on gun and hose assembly, from the date of retail 
purchase and is not transferable.  Warranty covers replacement parts.  
This limited one year warranty applies only to products used in consumer 
applications and does not apply to rental or commercial applications.

W

arranty

 r

eturns

I

tems returned for warranty consideration must have a Returned 

Merchandise Authorization (RMA) number and proof of purchase.  All 
unauthorized returns will be refused and shipped back to sender. Call 
1-866-815-2036 Monday through Friday 8:00 a.m. - 5:00 p.m 

(Central 

Standard Time)

. Or E-Mail to: [email protected] 24 hours a day.

P

ressUre

 W

asher

 l

iMited

 W

arranty

Summary of Contents for AR620









Reviews: