USER GUIDE
BLUETOOTH
®
STUDIO EARBUDS
3S-0777
For more information visit
www.3sixtgear.com/support
Siri is a trademark of Apple Inc., registered in the U.S. and other countries.
The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc.
and any use of such marks by 3SIXT is under license.
TECHNICAL SPECIFICATIONS
Bluetooth Version
4.1 +EDR
Bluetooth Profile
A2DP, AVRCP, HFP, HSP
Chipset
CSR8645
Audio Codec
APT-X
Noise Reduction
CVC 6.0
Bluetooth Range
10 metres
Music Playback
5 hours
Talk Time
5.5 hours
Standby Time
180 hours
Charging Time
2 hours
Dimensions
36 x 30 x 45 mm
Weight
16g
SAFE USE WARNING
Due to the isolating characteristics of these
Bluetooth Studio Earbuds do not use while driving,
riding a bike or where vehicular traffic is present, or in any
other activity where failure to hear surrounding sounds could
be dangerous. Use of these Earbuds at excessive volumes may
cause permanent hearing damage. Always turn the volume
down before use. Take caution in regards to inserting objects
into ear canal and use at own risk.
GENERAL OPERATION
Power on
Separate the two Earbud backs
Power off
Join the two Earbud backs together
Pair
Press the Multi-Function Button (MFB)
a
for
5 seconds (when ‘ON’)
Factory reset
Press the MFB
a
for 5 seconds (when charging)
LED INDICATOR & VOICE PROMPTS
Flashes blue twice
Voice says
“Power On”
Bluetooth Studio Earbuds
are ‘ON’
Flashes red for 2
seconds
Voice says
“Power Off”
Bluetooth Studio Earbuds
are ‘OFF’
Flashes between blue
and red
Voice says
“Pairing”
Bluetooth Studio Earbuds
are in ‘pairing mode’
Flashes between blue
and red 3 times
-
Bluetooth Studio Earbuds
are in ‘factory reset’
Flashes blue every
7 seconds
-
Bluetooth Studio Earbuds are
in ‘standby mode’ (not playing
music or not in a call)
MUSIC/CALL OPERATION
Play/Pause
Press the MFB
a
once to ‘pause’,
press once again to resume playing
Volume Up
Short press “
+
”
b
when playing music
Next Song
Long press “
+
”
b
when playing music
Volume Down
Short press “
-
”
c
when playing music
Previous Song
Long press “
-
”
c
when playing music
Answer a call
Press the MFB
a
once to ‘answer’ an incoming call
End a call
Press the MFB
a
once to ‘end’ call
Reject a call
Press the MFB
a
once for 1 second to ‘reject’
an incoming call
Transfer between
Earbuds and Phone
During a call, press the MFB
a
for 1 second
Redial last
outgoing call
Press the MFB
a
twice while in music playback
or ‘standby mode’
Mute
Press the MFB
a
twice during a call
Activate voice
control (e.g.. Siri)
Press the MFB
a
for 1 second while in music
playback or ‘standby mode’
!
3SIXT Bluetooth Studio Earbuds support multi-point technology,
which allows you to connect them to two different Bluetooth
enabled devices simultaneously.
1.
Follow the initial pairing instructions previously outlined on
the first device you would like to pair - ‘Device 1’.
2. Turn off the Bluetooth Studio Earbuds. Now follow the
pairing instructions to connect the Earbuds to the second
device - ‘Device 2’.
3. Select ‘
3SIXT-M777’ from the Bluetooth device list on
‘Device 1’ to finish the multi-point connection.
If ‘Device 1‘ is on a call, and a call comes in on ‘Device 2’, press
the Multi-Function Button (
a
) to answer the ‘Device 2’ call and
put the ‘Device 1‘ on hold. You can switch between the two calls
by double pressing the MFB (
a
).
PAIRING TO MULTIPLE DEVICES
