ZyXEL Communications ZyWALL USG Series, Reference Manual

Page: 318 / 426

Chapter 51 System
ZyWALL / USG (ZLD) CLI Reference Guide
318
51.4.1 Date/Time Commands
The following table describes the commands available for date and time setup. You must use the
configure terminal
command to enter the configuration mode before you can use these
commands.
51.5 Console Port Speed
This section shows you how to set the console port speed when you connect to the ZyWALL / USG
via the console port using a terminal emulation program. The following table describes the console
port commands.
You must use the
configure terminal
command to enter the configuration
mode before you can use these commands.
Table 192
Command Summary: Date/Time
COMMAND DESCRIPTION
clock date yyyy-mm-dd time hh:mm:ss
Sets the new date in year, month and day format
manually and the new time in hour, minute and second
format.
[no] clock daylight-saving
Enables daylight saving. The
no
command disables
daylight saving.
[no] clock saving-interval begin
{apr|aug|dec|feb|jan|jul|jun|mar|may|nov|oct|sep}
{1|2|3|4|last} {fri|mon|sat|sun|thu|tue|wed} hh:mm
end {apr|aug|dec|feb|jan|jul|jun|mar|may|nov|oct|sep}
{1|2|3|4|last} {fri|mon|sat|sun|thu|tue|wed} hh:mm
offset
Configures the day and time when Daylight Saving Time
starts and ends. The
no
command removes the day and
time when Daylight Saving Time starts and ends.
offset: a number from 1 to 5.5 (by 0.5 increments)
clock time hh:mm:ss
Sets the new time in hour, minute and second format.
[no] clock time-zone {-|+ hh }
Sets your time zone. The
no
command removes time
zone settings.
[no] ntp
Saves your date and time and time zone settings and
updates the data and time every 24 hours. The
no
command stops updating the data and time every 24
hours.
[no] ntp server { fqdn | w.x.y.z }
Sets the IP address or URL of your NTP time server. The
no
command removes time server information.
ntp sync
Gets the time and date from a NTP time server.
show clock date
Displays the current date of your ZyWALL / USG.
show clock status
Displays your time zone and daylight saving settings.
show clock time
Displays the current time of your ZyWALL / USG.
show ntp server
Displays time server settings.
Table 193
Command Summary: Console Port Speed
COMMAND DESCRIPTION
[no] console baud baud_rate
Sets the speed of the console port. The no command resets the console port
speed to the default (115200).
baud_rate
: 9600, 19200, 38400, 57600 or 115200.
show console
Displays console port speed.