ZyXEL Communications ZyWALL USG Series Reference Manual Download Page 277

Page: 277 / 426

Chapter 40 Application Object

ZyWALL / USG (ZLD) CLI Reference Guide

277

40.1.1.1

application-object

Examples

These are some example usage commands.

40.1.2 Application Object Group Commands

This table lists the application object group commands.

Router(config)# show application-object

Name

Description Ref

Content

===============================================================================

tests

New Create 1

Facebook Game (access)

Router(config)# show application-object tests

Name: tests

Description: New Create

Category Application

Application ID

===============================================================================

Social Network Facebook Game (access)

402685702

Router(config)#

Table 165

object-group application

Commands

COMMAND

DESCRIPTION

show object-group application <

object

Displays information on the named application object group.

object-group application <

object

Creates an object group. with the specified name. You may use 1-31
alphanumeric characters, underscores(

), or dashes (-), but the first

character cannot be a number. This value is case-sensitive. The

command disables it.

[no] description <

description

Write a description of the object group.

[no] application-object <

object

Adds the named application object to the object group. The

command removes it.

[no] object-group <

object

Creates an object group. The

command removes it.

no object-group application <

object

Deletes the object group with the specified name.

object-group application rename <

object

Renames the specified object group with a new name.

Summary of Contents for ZyWALL USG Series











































































































































































































































































































































































































































Search results

Summary of Contents for ZyWALL USG Series

Reviews:

Related manuals for ZyWALL USG Series

Brands by name

Popular brands

ZyXEL Communications ZyWALL USG Series, Reference Manual

Search results

Summary of Contents for ZyWALL USG Series

Reviews:

Related manuals for ZyWALL USG Series

Brands by name

Popular brands