Configuring Infrastructure mode
Configure wireless access point to Infrastructure mode with SMT
Configure wireless access point to Infrastructure mode with Web configurator
Configure wireless station to Infrastructure mode
●
Introduction
What is Infrastructure mode ?
Infrastructure mode, sometimes referred to as Access Point mode, is an operating mode of an 802.11b/Wi-Fi client unit. In infrastructure mode, the
client unit can associate with an 802.11b/Wi-Fi Access Point and communicate with other clients in infrastructure mode through that access point.
Configuration Wireless Access Point to Infrastructure mode using SMT.
To configure Infrastructure mode of your ZyAIR G-5100 wireless AP please follow the steps below.
1. From the SMT main menu, enter 3 to display Menu 3 – LAN Setup.
2. Enter 5 to display Menu 3.5 – Wireless LAN Setup.
Menu 3.5 - Wireless LAN Setup
ESSID= Wireless Edit MAC Address Filter= No
Hide ESSID= No Edit Roaming Configuration= No
Channel ID= CH06 2437MHz Block Intra-BSS Traffic= Yes
RTS Threshold= 2432 Number of Associated Stations= 32
Frag. Threshold= 2432 Breathing LED= Yes
WEP Encryption= Disable Output Power= 17dBm
Default Key= N/A
Key1= N/A
Key2= N/A
Key3= N/A
Key4= N/A
Authen. Method= N/A
Press ENTER to Confirm or ESC to Cancel:
