ZyAIR B-620 User’s Guide
Removing and Upgrading the ZyAIR Utility
6-1
Chapter 6
Removing and Upgrading the ZyAIR
Utility
This chapter describes how to uninstall or upgrade the ZyAIR Utility.
6.1 Removing the ZyAIR Utility
Follow the steps below to remove (or uninstall) the ZyAIR Utility from your computer.
Step 1.
Click
Start
,
Programs
,
ZyAIR Wireless LAN Utility
,
Uninstall
.
Step 2.
When prompted, click
Yes
to remove the driver and the utility software.
Step 3.
When prompted to restart your computer, click
Yes
and then click
Finish
.
6.2 Upgrading the ZyAIR Utility
Before you uninstall the ZyAIR Utility, save the current network configuration.
To perform the upgrade, follow the steps below.
Step 1.
Download the latest version of the utility from the ZyXEL web site and save the file on your
computer.
Step 2.
Follow the steps in the
section to remove the current ZyAIR Utility
from your computer.
Step 3.
Restart the computer when prompted.
Step 4.
After restarting, refer to the procedure in the
Quick Installation Guide
to install the new utility
software.
Step 5.
Check the version numbers in the
About
screen to make sure the new utility is installed
properly.
