ZyXEL Communications XS3800-28, User Manual, Page: 184 / 789

Chapter 26 SNMP
XS3800-28 User’s Guide
184
C
HAPTER
26
SNMP
26.1 SNMP Overview
This chapter introduces the SNMP screens and shows you how to setup SNMP settings for management.
26.1.1 What You Can Do
• Use the SNMP screen ( Section 26.2 on page 184 ) to configure general SNMP settings.
• Use the SNMP User screen ( Section 26.3 on page 186 ) to create SNMP users for authentication with
managers using SNMP v3 and associate them to SNMP groups.
• Use the SNMP Trap Group screen ( Section 26.4 on page 188 ) to specify the types of SNMP traps that
should be sent to each SNMP manager.
• Use the SNMP Trap Port screen ( Section 26.5 on page 189 ) to enable/disable sending SNMP traps on a
port.
26.2 Configure SNMP
Use this screen to configure your SNMP settings.
Click SYSTEM > SNMP to view the screen as shown.