XMG3512-B10A User’s Guide
221
C
HAPTER
29
Remote Management
29.1 Overview
Remote management controls through which interface(s), which services can access the XMG.
Note: The XMG is managed using the Web Configurator.
29.2 The MGMT Services Screen
Use this screen to configure through which interface(s), which services can access the XMG. You can
also specify the port numbers the services must use to connect to the XMG. Click
Maintenance >
Remote Management > MGMT Services
to open the following screen.
Figure 141
Maintenance > Remote Management > MGMT Services
The following table describes the fields in this screen.
Table 112 Maintenance > Remote Management > MGMT Services
LABEL
DESCRIPTION
WAN Interface
used for services
Select
Any_WAN
to have the XMG automatically activate the remote management service
when any WAN connection is up.
Select
Multi_WAN
and then select one or more WAN connections to have the XMG activate the
remote management service when the selected WAN connections are up.
service
This is the service you may use to access the XMG.
LAN/WLAN
Select the
Enable
check box for the corresponding services that you want to allow access to the
XMG from the LAN/WLAN.
WAN
Select the
Enable
check box for the corresponding services that you want to allow access to the
XMG from all WAN connections.
Summary of Contents for XMG3512-B10A
