Chapter 6 Tutorial
XGS1930 Series User’s Guide
69
C
HAPTER
6
Tutorial
6.1 Overview
This chapter provides some examples of using the Web Configurator to set up and use the Switch. The
tutorial include:
•
How to Use DHCPv4 Relay on the Switch
6.2 How to Use DHCPv4 Relay on the Switch
This tutorial describes how to configure your Switch to forward DHCP client requests to a specific DHCP
server. The DHCP server can then assign a specific IP address based on the information in the DHCP
requests.
6.2.1 DHCP Relay Tutorial Introduction
In this example, you have configured your DHCP server (192.168.2.3) and want to have it assign a
specific IP address (say 172.16.1.18) to DHCP client
A
based on the system name, VLAN ID and port
number in the DHCP request. Client
A
connects to the Switch’s port 2 in VLAN 102.
Figure 49
Tutorial: DHCP Relay Scenario
6.2.2 Create a VLAN
Follow the steps below to configure port 2 as a member of VLAN 102.
1
Access the Web Configurator through the Switch’s management port.
Summary of Contents for XGS1930-28HP
Page 19: ...19 PART I User s Guide...
Page 39: ...39 PART II Technical Reference...