ZyXEL Communications WRE2206 User Manual Download

Page: 50 / 70

WRE2206 User’s Guide

HAPTER

Tools

9.1 Overview

This chapter shows you how to upload a new firmware, upload or save backup configuration files,
restart the WRE2206 and configure LEDs.

9.2 What You Can Do

• Use the

Firmware

screen to upload firmware to your WRE2206 (

Section 9.3 on page 50

• Use the

Configuration

screen to view information related to factory defaults, backup

configuration, and restore configuration (

Section 9.4 on page 52

• Use the

Restart

screen to have the WRE2206 reboot (

Section 9.5 on page 54

• Use the

LED

screen to configure the LEDs (

Section 9.6 on page 54

9.3 Firmware Upload Screen

Find firmware at

www.zyxel.com

in a file that (usually) uses the system model name with a “*.bin”

extension, e.g., “WRE2206.bin”. The upload process uses HTTP (Hypertext Transfer Protocol) and
may take up to two minutes. After a successful upload, the system will reboot.

Click

Maintenance > Tools

. Follow the instructions in this screen to upload firmware to your

WRE2206.

Summary of Contents for WRE2206







































































Search results

Summary of Contents for WRE2206

Reviews:

Related manuals for WRE2206

Brands by name

Popular brands

ZyXEL Communications WRE2206, User Manual

Search results

Summary of Contents for WRE2206

Reviews:

Related manuals for WRE2206

Brands by name

Popular brands