ZyXEL Communications WAP5705, User Manual

Page: 85 / 156

Chapter 9 Wireless LAN
WAP5705 User’s Guide
85
The following table describes the labels in this screen.
9.11 Scheduling Screen
Use this screen to set the times your wireless LAN is turned on and off. Wireless LAN scheduling is
disabled by default. The wireless LAN can be scheduled to turn on or off on certain days and at
certain times. To open this screen, click
Network > Wireless LAN > Scheduling tab.
Figure 56
Network > Wireless LAN > Scheduling
The following table describes the labels in this screen.
Table 36
Network > Wireless LAN > WPS Station
LABEL DESCRIPTION
Push Button Use this button when you use the PBC (Push Button Configuration) method to configure
wireless stations’s wireless settings. See
Section 7.3.1 on page 54 .
Click this to start WPS-aware wireless station scanning and the wireless security
information synchronization.
Or input station’s
PIN number Use this button when you use the PIN Configuration method to configure wireless station’s
wireless settings. See
Section 7.3.2 on page 55 .
Type the same PIN number generated in the wireless station’s utility. Then click Start to
associate to each other and perform the wireless security information synchronization.
Table 37
Network > Wireless LAN > Scheduling
LABEL DESCRIPTION
Wireless LAN Scheduling
Enable Wireless
LAN Scheduling Select this to enable Wireless LAN scheduling.
Scheduling