ZyXEL Communications VSG-1200 User Manual Download Page 240

Page: 240 / 280

VSG-1200 User’s Guide

240

Appendix D Vendor Specific Attributes

Table 86

VSG-1200 Supported VSAs

NO. NAME

DESCRIPTION

TYPE

VALUE

Traffic-Limit

This attribute defines total bandwidth (in Mbytes) allowed for a

subscriber. Internet access is based on the total upload/

download bandwidth regardless of the account expiration

time.
This attribute is supported when you set the VSG to use an

external RADIUS server for user authentication in

accumulation mode.

Integer maximum

4095

SMTP Redirect

This attribute indicates whether the VSG is to re-direct E-

mails.
Values:

= do not redirect e-mails.

= allow e-mail redirection.

Note:

To allow e-mail redirection, you

must

configure the SMTP settings on the VSG. Refer to

Section 4.8 “Server Configuration” on page 61

for

more information.

Integer

0, 1

BW-Up

This attribute defines the upload bandwidth allowed for a

subscriber. Internet access is based on the upload bandwidth

regardless of the account expiration time. This means that a

subscriber is allowed to access the Internet until the total

upload bandwidth allocated is reached.
This attribute is supported when you enable bandwidth

management on the VSG with the class of service based on

the RADIUS settings. Refer to

Chapter 16, “Bandwidth

Management,” on page 141

for more information.

Note:

You

must

also specify the

BW-Down

attribute.

Integer 64

-24567

BW-Down

This attribute defines the download bandwidth allowed for a

subscriber. Internet access is based on the download

bandwidth regardless of the account expiration time. This

means that a subscriber is allowed to access the Internet until

the total download bandwidth allocated is reached.
This attribute is supported when you enable bandwidth

management on the VSG with the class of service based on

the RADIUS settings. Refer to

Chapter 16, “Bandwidth

Management,” on page 141

for more information.

Note:

You

must

also specify the

BW-Up

attribute.

Integer 64

24567

Portable Page

URL

This attribute allows you to specify a different advertising web

site for each subscriber after a successful login.

String maximum

200

Summary of Contents for VSG-1200

























































































































































































































































































Search results

Summary of Contents for VSG-1200

Reviews:

Brands by name

Popular brands

ZyXEL Communications VSG-1200, User Manual

Search results

Summary of Contents for VSG-1200

Reviews:

Brands by name

Popular brands