manualshive.com logo in svg

ZyXEL Communications VMG4325-B10A, User Manual

Share
Download
ZyXEL Communications VMG4325-B10A User Manual Download Page 199

VMG4380-B10A / VMG4325-B10A User’s Guide

199

C

H A P T E R

      1 3

Interface Group

13.1  Overview

By default, all LAN and WAN interfaces on the Device are in the same group and can communicate 
with each other. Create interface groups to have the Device assign the IP addresses in different 
domains to different groups. Each group acts as an independent network on the Device. This lets 
devices connected to an interface group’s LAN interfaces communicate through the interface 
group’s WAN or LAN interfaces but not other WAN or LAN interfaces.

13.1.1  What You Can Do in this Chapter

The Interface Group screens let you create multiple networks on the Device (

Section 13.2 on 

page 199

).

13.2  The Interface Group Screen

You can manually add a LAN interface to a new group. Alternatively, you can have the Device 
automatically add the incoming traffic and the LAN interface on which traffic is received to an 
interface group when its DHCP Vendor ID option information matches one listed for the interface 
group. 

Use the LAN screen to configure the private IP addresses the DHCP server on the Device assigns to 
the clients in the default and/or user-defined groups. If you set the Device to assign IP addresses 
based on the client’s DHCP Vendor ID option information, you must enable DHCP server and 
configure LAN TCP/IP settings for both the default and user-defined groups. See 

Chapter 8 on page 

133

 for more information.

Summary of Contents for VMG4325-B10A
















































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands