ZyXEL Communications VFG6005, User Manual

Page: 92 / 162

83
Product Specifications
The following tables summarize the VFG6005 Series hardware and firmware features.
Hardware Features
Dimensions (W x D x H) 159 mm x 107 mm x 25 mm
Weight 225 g
Power Specification
Input: 100~240 V AC, 50~60 Hz
Output: 12 V DC 1.5 A
Gigabit Ethernet ports
Auto-negotiating: 100 Mbps, 1000 Mbps in either half-duplex or
full-duplex mode.
Auto-crossover: Use either crossover or straight-through Ethernet
cables.
4 Port Gigabit Switch
A combination of switch and router makes your VFG a cost-effective
network solution. You can add up to four computers to the VFG without
the cost of a hub when connecting to the Internet through the WAN. Add
more than four computers to your LAN by using another hub or switch.
LEDs PWR/SYS, WLAN (VFG6005N), WAN, LAN1-4
Reset Button
The reset button is built into the rear panel. Use this button to restore the
VFG to its factory default settings. Press for 1 second to restart the
device. Press and hold for 7 seconds or until PWR/SYS LED is blinking
to restore to factory default settings.
Antenna
The VFG6005N is equipped with two 2dBi (2.4GHz) detachable
antennas to provide clear radio transmission and reception on the
wireless network.
Operation Environment
Temperature: 0º C ~ 40º C / 32ºF ~ 104ºF