ZyXEL Communications VES-1616F-44, User Manual

Page: 233 / 296

VES-1616F/1624F-44 User’s Guide
232 Chapter 32 Introducing the Commands
32.11.5 mvr Commands
The following table lists the
mvr
commands in configuration mode.
Table 86 mvr Commands
COMMAND DESCRIPTION P
mvr <1-
4094>
Enters the MVR (Multicast VLAN
Registration) configuration mode.
13
8021p-priority <0 - 7>
Select a priority level (0-7) with which
the switch replaces the priority in
outgoing IGMP control packets
(belonging to this multicast VLAN).
13
exit Exist from the MVR configuration
mode.
13
group <name-str>
start-address <ip>
end-address <ip>
Sets the multicast group range for the
MVRMVR.
13
inactive
Disables MVR settings. 13
mode
<dynamic|compatible>
Sets the MVR mode. 13
name <name>
Sets the MVR name for identification
purposes.
13
no
13
group
Disables all MVR group settings. 13
group <name>
Disables the specified MVR group
setting.
13
inactive
Enables MVR. 13
receiver-port
<port-list>
Disables the receiver port(s).
An MVR receiver port can only
receive multicast traffic in a multicast
VLAN
13
source-port
<port-list>
Disables the source port(s).
An MVR source port can send and
receive multicast traffic in a multicast
VLAN
13
tagged <port-
list>
Sets the port(s) to remove VLAN
tags.
13
receiver-port <port-
list>
Sets the receiver port(s).
An MVR receiver port can only
receive multicast traffic in a multicast
VLAN
13
source-port <port-
list>
Sets the source port(s).
An MVR source port can send and
receive multicast traffic in a multicast
VLAN
13
tagged <port-list>
Sets the port(s) to include VLAN tags. 13