ZyXEL Communications VES-1616F-44, User Manual

Page: 213 / 296

VES-1616F/1624F-44 User’s Guide
212 Chapter 32 Introducing the Commands
32.11.2 Enable Mode
The following table describes the commands available for Enable mode.
Table 83 Command Summary: Enable Mode
COMMAND DESCRIPTION P
boot config
Restarts the system. 13
image <index>
Restarts the system with the specified
firmware file.
1: ras-0
2: ras-1
13
configure
Accesses Configuration mode. See
Section 32.11.3 on page 216 .
13
copy running-config tftp <ip>
<remote-file>
Backs up running configuration to the
specified TFTP server with the
specified file name.
13
tftp config <index>
<ip> <remote-
file>
Restores configuration with the
specified filename from the specified
TFTP server.
13
flash <ip>
<remote-file>
Restores firmware via TFTP. 13
disable
Exits Enable (or privileged) mode. 13
enable
Accesses Enable (or privileged) mode. 13
erase running-config
Resets to the factory default settings. 13
exit
Exits Enable (or privileged) mode. 13
help
Displays help information. 13
history
Displays a list of command(s) that you
have previously executed.
13
igmp-flush
Clears all IGMP information. 13
kick tcp <session ID>
Disconnects the specified TCP
session.
13
logout
Exits Enable (or privileged) mode. 13
mac-flush
Clears the MAC address table. 13
<port-num>
Removes all learned MAC address on
the specified port(s).
13
ping <ip|host-name>
Sends Ping request to an Ethernet
device.
13
reload config <index>
Restarts the system and use the
specified configuration file.
13
rmt-fw-
upgrade port-channel <port-
list>
Upgrades firmware on CPE device(s)
connected to the specified port(s).
13
release
Deletes the CPE firmware file from the
device.
13
rmt-vtr port-channel <port-
list>
Configures the remote CPE device(s).
Refer to Section 32.11.6 on page 233 .
13