manualshive.com logo in svg

ZyXEL Communications VES-1616, Support Notes

The ZyXEL Communications VES-1616 is a versatile networking product designed for seamless connectivity. Explore its extensive specifications and unlock its full potential by downloading the user manual for free at manualshive.com. With detailed instructions and comprehensive information, enhance your experience with this high-performance device.

Share
Download
background image

ZyXEL 

 

VES-1616/24FA-5x Series Support Notes

 

All contents copyright 2008 ZyXEL Communications Corporation.

 

2

Operation Mode ---------------------------------------------------------------------------- 69 
Scenario of MVR --------------------------------------------------------------------------- 69 

Triple play Application -------------------------------------------------------------------------- 77 

Configure VES-1616FA-54 -------------------------------------------------------------- 77 
Configure P-870H-51 ---------------------------------------------------------------------- 82 
Ringing a network by building redundant links and connections between 
Switch ----------------------------------------------------------------------------------------- 91 

What is Spanning Tree Protocol? ----------------------------------------------------------- 91 

Spanning Tree Overview ----------------------------------------------------------------- 91 
How STP Works ---------------------------------------------------------------------------- 92 
How STP works ----------------------------------------------------------------------------- 94 
Switching security -------------------------------------------------------------------------- 96 

MAC Limit ----------------------------------------------------------------------------------------- 96 
Setting up 802.1x Radius Authentication. ------------------------------------------------- 98 

Port Authentication: RADIUS Setup --------------------------------------------------- 98 
RADIUS Server Setup -------------------------------------------------------------------- 99 
Create User Account ---------------------------------------------------------------------- 99 
Supplicant Setup (Windows XP) -------------------------------------------------------- 99 
802.1x/MD5-challenge setup ---------------------------------------------------------- 100 

Classifier & Policy rule setup on your Switch ------------------------------------------- 102 

Classifier Configuration ----------------------------------------------------------------- 103 
Policy Rule Configuration -------------------------------------------------------------- 104 
Centralized Management -------------------------------------------------------------- 105 

Introduction to SNMPc and NetAtlas ----------------------------------------------------- 105 

SNMPc Overview ------------------------------------------------------------------------ 106 
EMS Overview ---------------------------------------------------------------------------- 107 

FAQ -----------------------------------------------------------------------------------------------  114 

What are the default IP parameter settings? -------------------------------------- 114 
What is the default login Name and Password to log into the Web 
Configurator? ------------------------------------------------------------------------------  114 
How to access my SWITCH through the console port? ------------------------ 114 
What is default login password for console, telnet, and FTP login? --------- 114 
How to change the password? -------------------------------------------------------- 114 
How to access the Command Line Interface (CLI)? ----------------------------- 115 
If I have forgotten the password, how to reset the password to the default 
setting? ------------------------------------------------------------------------------------- 115 
How to configure the IP address? ---------------------------------------------------- 115 
Is Online Help available on the Web Configurator? ------------------------------ 116 
How to restart device from the Web Configurator? ------------------------------ 116 
How to check the current running firmware version? ---------------------------- 116 
Is the mini GBIC transceiver hot-swappable? ------------------------------------- 117 
What is "Dual-Personality interface" on a VDSL Switch? ---------------------- 117 
Can I enable IGMP snooping on the Switch which is acting as an IGMP 
Router? ------------------------------------------------------------------------------------- 117 
Can I enable MVR and IGMP snooping at the same time? -------------------- 117 

 

Summary of Contents for VES-1616























































































































Reviews:

No comments

Related manuals for VES-1616

Hama S2100 Manual preview
S2100
Brand: Hama Pages: 9
Dataprobe iBoot PoE-P General Description Manual preview
iBoot PoE-P
Brand: Dataprobe Pages: 31
IBM ThinkPad 600 Product Overview preview
ThinkPad 600
Brand: IBM Pages: 13
IBM Flex System EN2092 Quick Start Manual preview
Flex System EN2092
Brand: IBM Pages: 2
Panasonic KX-T206E Product Description preview
KX-T206E
Brand: Panasonic Pages: 20
Panasonic PN28240i-ID Operation Manual preview
PN28240i-ID
Brand: Panasonic Pages: 281
AVE 8PSWT Specification preview
8PSWT
Brand: AVE Pages: 2
Cabletron Systems DLEHF-MA User Manual preview
DLEHF-MA
Brand: Cabletron Systems Pages: 194
Labkotec SET-2000 Oil/Sludge Installation And Operating Instructions Manual preview
SET-2000 Oil/Sludge
Brand: Labkotec Pages: 15
StarTech.com 8STSV231DDVDUA Manual preview
8STSV231DDVDUA
Brand: StarTech.com Pages: 16
Videplus JAR-SW16-P300 User Manual preview
JAR-SW16-P300
Brand: Videplus Pages: 13
enbrighten 58433 Manual preview
58433
Brand: enbrighten Pages: 2
Cabletron Systems 42T User Manual preview
42T
Brand: Cabletron Systems Pages: 105
Comnet CNGE2FE8MSPOE2 Installation And Operation Manual preview
CNGE2FE8MSPOE2
Brand: Comnet Pages: 105
Equip Desktop KVM Switch Manual preview
Desktop KVM Switch
Brand: Equip Pages: 10
Gigabyte GN-GT5D User Manual preview
GN-GT5D
Brand: Gigabyte Pages: 10
Rose electronics VISTA KVL Quick Start Manual preview
VISTA KVL
Brand: Rose electronics Pages: 4
Pakedge SE-8 Quick Start Manual preview
SE-8
Brand: Pakedge Pages: 8

Brands by name

Popular brands

Load more brands