ZyXEL Communications V500-T1, User Manual

Page: 83 / 294

Chapter 6 LCD Menus: Basic Settings
V500 Series User’s Guide
83
The following table describes the labels in this screen.
6.5.1 Volume Screen
When you select one of the options in the Volume Setting menu, a screen similar to the
following displays. This example uses the Speaker Volume screen.
Figure 30 LCD Menu: Volume Screen
The following table describes the labels in this screen.
Table 13 LCD Menu: Volume Setting
LABEL DESCRIPTION
Speaker Volume Select this to set the internal speakerphone volume. This controls both the
internal speaker and the internal microphone.
Phone Volume Select this to set the handset volume. This controls both the handset’s
speaker and its microphone.
Ring Volume Select this to set the volume of the V500’s ringtone. This setting applies to
all configured group rings.
Headset Volume Select this to set the volume of an attached headset (or any device
connected to the external speaker and/or microphone sockets). This
controls both the handset’s speaker (earpiece) and its microphone.
Select Press this to choose the highlighted field in the menu.
Back Press this to return to the previous screen.
Speaker Volume
Apply Down Up Cancel
Table 14 LCD Menu: Volume Setting
LABEL DESCRIPTION
Save Press this to save your settings.
Up Press this to increase the volume.
Down Press this to decrease the volume.
Cancel Select this to return to the previous screen without saving your settings.