9
V-250 User’s Guide
1
Select one of the last numbers dialed by pressing the
Navigator-down
button when the V-250 is in stand-by
mode (not in any configuration screen).
2
Dial one of the recently dialed numbers by pressing the
Off-hook
button when the phone number is selected.
Note:
The V-250 stores phone numbers up to 24 digits
long (longer phone numbers will be truncated).
You can clear all of the recently dialed phone numbers.
1
Select one of the last numbers dialed.
2
Press and hold the
On-hook
button for about 2 seconds
or until a
YES
/
NO
prompt appears on the LCD.
3
Use the navigator buttons to select
YES
and press the
Right Softkey
to select
OK
and clear all the recently
dialed numbers from the V-250’s memory.
5.3 Call Timer
The LCD displays the time of your ongoing phone calls. The
timer starts when you press the
Off-hook
button and stops
when you press the
On-hook
button.
5.4 Adjust the Volume
The volume of the V-250 earpiece and speaker can be
adjusted into three levels. They are low:
I
, medium:
I
I
and
high:
I
I
I
.
