Task 2 – VPN Tracker Configuration
After finishing task 1, you should now have a completed a configuration checklist containing your ZyWALL USG VPN gateway’s settings.
We will now create a matching configuration in VPN Tracker.
Step One: Add a connection
➔
Open VPN Tracker 365.
➔
Click on the + in the bottom left corner of the app window and select “
Create new Company Connection
”
➔
Select
Zyxel
from the list.
➔
Select your model (e.g. USG 1100/1900) and enter a name for your connection.
Step 2 – Configure the VPN Connection
Once you have added the new connection, there are a few settings that need to be customized to
match what is configured on your VPN gateway.
➔
VPN Gateway
:
Enter the WAN IP address (or hostname) of your VPN gateway that you wrote
down as
(1)
➔
Local Address
: Leave empty for now. Depending on your setup, you may have to set a specific
local address later. Refer to
→
Supporting Multiple Users
on when and how to set a specific
local address
➔
Remote Networks
: Enter the network address of the network that is being accessed through
the VPN tunnel
(2)
. Separate the subnet mask with a forward slash („
/
“)
Tip:
VPN Tracker will automatically turn the IP address into a network address. Double-check that
the result is the same as the LAN address object configured for the Local Policy in
Step 5
15
