Chapter 36 AP Profile
UAG Series User’s Guide
426
Radius Server Type
Select
Internal
to use the UAG’s internal authentication database, or
External
to use
an external RADIUS server for authentication.
Primary /
Secondary Radius
Server Activate
Select this to have the UAG use the specified RADIUS server.
Radius Server IP
Address
Enter the IP address of the RADIUS server to be used for authentication.
Radius Server Port
Enter the port number of the RADIUS server to be used for authentication.
Radius Server
Secret
Enter the shared secret password of the RADIUS server to be used for authentication.
MAC Authentication Select this to use an external server or the UAG’s local database to authenticate wireless
clients by their MAC addresses. Users cannot get an IP address if the MAC
authentication fails.
An external server can use the wireless client’s account (username/password) or Calling
Station ID for MAC authentication. Configure the ones the external server uses.
Auth. Method
This field is available only when you set the RADIUS server type to
Internal
.
Select an authentication method if you have created any in the
Configuration >
Object > Auth. Method
screen.
Delimiter (Account) Select the separator the external server uses for the two-character pairs within account
MAC addresses.
Case (Account)
Select the case (
upper
or
lower
) the external server requires for letters in the account
MAC addresses.
Delimiter (Calling
Station ID)
RADIUS servers can require the MAC address in the Calling Station ID RADIUS attribute.
Select the separator the external server uses for the pairs in calling station MAC
addresses.
Case (Calling
Station ID)
Select the case (
upper
or
lower
) the external server requires for letters in the calling
station MAC addresses.
802.1X
Select this to enable 802.1x secure authentication.
Auth. Method
This field is available only when you set the RADIUS server type to
Internal
.
Select an authentication method if you have created any in the
Configuration >
Object > Auth. Method
screen.
Reauthenticatio
n Timer
Enter the interval (in seconds) between authentication requests. Enter a 0 for unlimited
requests.
The following fields are available if you set
Security Mode
to
wep
.
Idle Timeout
Enter the idle interval (in seconds) that a client can be idle before authentication is
discontinued.
Authentication Type Select a WEP authentication method. Choices are
Open
or
Share
key.
Table 193
Configuration > Object > AP Profile > SSID > Security Profile > Add/Edit Security Profile
LABEL
DESCRIPTION
