ZyXEL Communications U-336R, User Manual

Page: 78 / 150

66 Fax Operation
Command Value Description
(+FCS parameter is still loaded)
tpr=1 Transmitter Parameters are reported.
+FCS: response reports are generated.
idr=0 ID Strings are not reported. +FTI: +FCI:
and +FPI: response reports are
suppressed.
idr=1 ID Strings are reported. +FNF:, +FNS:
and +FNC: response reports are
generated.
nsr=0 Non-standard frames are not reported.
+FTI: +FCI: and +FPI: response reports
are suppressed.
nsr=1 Non-standard frames are reported. +FTI:,
+FCI: and +FPI: response reports are
generated.
+FNS="string
" Non-standard byte string parameter.
"string": string of hexadecimal coded
octets.
+FPI="string" Local fax station ID string, for polling
Rx.
+FPR=n Serial port rate control parameter:
n=0 Automatic DTE rate detection by the
DCE.
n>0 Serial rate is fixed at the value multiplied
by 2400 bps. For example, when n=8, the
DTE rate is equal to 19200 bps
(8x2400).
+FPS=n Page transfer status: refer to the +FPTS
Class 2 command in previous sections for
settings.
+FRQ=pgl,cbl Receiving quality threshold parameters:
pgl= Specify the percentage of good lines (e.g.