4
4
Installation
1.
Plug the SHD2110/3110 into a wall outlet near the appliance to be
controlled.
2.
Plug the appliance into the SHD2110/3110. Ensure the power load
does not exceed 3000 watts.
3.
Turn the appliance on.
4.
The ON/OFF button on the SHD2110/3110 can now control the power
of your appliance. Press it to manually turn the appliance on/off.
Adding to Z-Wave Network
When power is initially applied, the LED on the front of the SHD2110/
3110 flashes on and off repeatedly at a 2-second interval. This implies
that it has not been allocated a node ID and cannot work with Z-Wave
enabled devices.
You can use the On/Off button in front of the SHD2110/3110 to include,
exclude, associate with a Z-Wave Network, or reset.
Function
Description
LED Indication
No node ID
The Z-Wave Controller does
not allocate a node ID to the
SHD2110/3110.
On and off repeatedly at a 2-
second interval
Inclusion
1. Have the Z-Wave Controller
enter inclusion mode.
The LED is on if you press
On
.
It is off if you press
Off
.
2. Press the On/Off button 3
times within 1.5 seconds to
enter inclusion mode.
Summary of Contents for SHD2110
Page 2: ...2 ...
