7
b. SFP:
If fiber access is available, insert a fiber optic SFP module and
connect the fiber optic cable for Internet access. (See
on page
for more information on SFP module.)
c. GbE:
If you already have a broadband router or modem, use an Ethernet
cable to connect the
GbE
port to it for Internet access.
Your Device does not use Fiber (SFP) and broadband (GbE)
connections at the same time.
5. ETHERNET LAN:
Use an Ethernet cable to connect a computer to an
Ethernet port for initial configuration and/or Internet access.
6. USB:
Do one of the following USB connections:
a.
Connect a USB (version 2.0 or lower) memory stick or a USB hard drive
for file sharing. The Device automatically detects the USB device.
b.
Connect a 3G adapter to access the Internet wirelessly via a 3G network.
7. 12V DC:
Use the provided power adaptor to connect the
12V DC
socket on
the Device’s rear panel to an appropriate power source. Push the Device’s
ON/OFF
button to the
ON
position. Make sure the power at the outlet is on.
Look at the lights on the front panel.
• The
PWR
light blinks while your Device starts up and then stays on once it
is ready.
• The
DSL
light is green when your Device has an ADSL connection. It is
orange when you have a VDSL connection. The
DSL2
light comes on
when using DSL bonding
1
.
• The
INET
light turns on when the gateway is able to access the Internet.
• The
USB
light turns on when your Device detects a connected USB device
and blinks when there is traffic.
• The
SFP
light turns on after your Device has a fiber connection and blinks
when there is traffic.
1. Applies to the SBG3600-N000.
Summary of Contents for SBG3600-N SERIES
Page 1: ......
Page 4: ...3 RESET DSL GBE USB SFP LEDS LAN 1 4 ON OFF POWER WLAN CONSOLE SBG3600 NB SIM CARD...
Page 15: ...14...
Page 16: ......
