ZyXEL Communications SAM1316-22, User Manual

Page: 371 / 464

Chapter 56 IP Commands
SAM1316-22 User’s Guide
371
56.3.1 Show
Syntax:
ras> ip show
Use the command to display the current management IP settings.
56.3.2 Ping Command
Syntax:
ras> ip ping <ip> [count]
This is an IP facility to check for network functionality by sending an echo request
to another IP host and waiting for the reply.
56.3.3 Route Set Command
Syntax:
ras> ip route set <dst ip>[/netmask] <gateway ip> [metric] <name>
ras> ip route set default <gateway ip> <metric>
where
This command defines a new, static IP forwarding route or edits an existing one.
56.3.4 Route Delete Command
Syntax:
ras> ip route delete <dst ip>[/netmask]
<dst ip> =
The destination IP address of packets that this static
route is to route.
[/netmask] =
The destination subnet mask of packets that this static
route is to route.
<gateway ip> =
The IP address of the gateway that you want to send
the packets through.
[metric] =
The metric (hop count) of this static route.
<name> =
A name to identify this static route. Up to 31 ASCII
characters. Spaces and tabs are not allowed.
default =
Use this to configure the SAM1316-22’s default route.