ZyXEL Communications SAM1316-22, User Manual

Page: 357 / 464

SAM1316-22 User’s Guide
357
C
H A P T E R
5 3
PPPoE Intermediate Agent
Commands
53.1 PPPoE Agent Information
Use these commands if you want the SAM1316-22 to add a vendor-specific tag to
PADI (PPPoE Active Discovery Initialization) and PADR (PPPoE Active Discovery
Request) packets from PPPoE clients. This tag gives a PPPoE termination server
additional information (such as the port number, VLAN ID, and MAC address) that
the server can use to identify and authenticate a PPPoE client.
53.1.1 PPPoE Intermediate Agent Clear Info Command
Syntax:
ras> switch poeagent clearinfo <vid>|all
where
This command clears any extra information the SAM1316-22 adds to PADI and
PADR packets in the specified VLAN or for all VLAN.
53.1.2 PPPoE Intermediate Agent Enable Command
Syntax:
ras> switch poeagent enable <vid>|all
where
<vid>|all =
The ID of the VLAN to which to apply the setting. Type
all
to apply the setting to all VLAN.
<vid>|all =
The ID of the VLAN to which to apply the setting. Type
all
to apply the setting to all VLAN.