ZyXEL Communications SAM1316-22, User Manual

Page: 335 / 464

Chapter 51 MAC Commands
SAM1316-22 User’s Guide
335
The following example turns off the MAC filtering feature on DSL port 5.
51.2.4 MAC Filter Mode Command
Syntax:
ras> switch mac filter mode <port> <accept|deny>
where
This command sets whether the SAM1316-22 allows or blocks access for the MAC
addresses you specify.
The following example sets DSL port 5 to allow frames from the MAC addresses
specified for DSL port 5.
51.2.5 MAC Filter Set Command
Syntax:
ras> switch mac filter set <port> <mac> [<mac> <mac> ...]
where
This command adds an allowed source MAC address on the specified DSL port.
Figure 165 MAC Filter Disable Command Example
ras> switch mac filter disable 5
<accept|deny> =
accept = Only allow frames from MAC addresses that
you specify and block frames from other MAC
addresses.
deny = Block frames from MAC addresses that you
specify and allow frames from other MAC addresses.
Figure 166 MAC Filter Mode Command Example
ras> switch mac filter mode 5 accept
<port> =
The number of a DSL port.
<mac> =
The source MAC address in "00:a0:c5:12:34:56"
format.