ZyXEL Communications SAM1316-22, User Manual

Page: 148 / 464

Chapter 18 IGMP
SAM1316-22 User’s Guide
148
The following table describes the labels in this screen.
18.6 IGMP Filter Setup Screen
To open this screen, click Advanced Application, IGMP, Filter Setup. This
screen is discussed in
Section 14.9 on page 118 .
Table 39 IGMP Setup
LABEL DESCRIPTION
IGMP Status Click IGMP Status to open the IGMP Setup screen where you can
view current IGMP information (see
Section 18.3 on page 143 ).
Filter Setup Click Filter Setup to open the IGMP Filter Profile screen where you
can configure IGMP multicast filter profiles (see
Section 18.6 on page
148 ).
IGMP Mode Select Proxy to have the device use IGMP proxy.
Select Snooping to have the device passively learn multicast groups.
Select Disable to have the device not use either IGMP proxy or
snooping.
Apply Click Apply to save your IGMP mode settings.
Clicking Apply saves your changes to the SAM1316-22’s volatile
memory. The SAM1316-22 loses these changes if it is turned off or
loses power, so use the Config Save link on the navigation panel to
save your changes to the non-volatile memory when you are done
configuring.
Add Static Query
VLAN Enter a VLAN ID in this field and click Apply to create a static query
VLAN.
Static Query VID
Table This displays the static IGMP query VLANs already configured on the
SAM1316-22.
Index This is the index number of an existing static IGMP query VLAN on the
SAM1316-22.
Query VID This is the static IGMP query VLAN’s VLAN ID.
Select Click this to select an entry in the static query VLAN table.
Delete Select a static query VLAN and click this to remove it from the table.
Dynamic Query
VID Table This section displays the list of dynamic query VLANs.
Index This is the dynamic IGMP query VLAN.
Query VID This is the dynamic IGMP query VLAN’s VLAN ID.