Getting Connected
Important:
This guide assumes that you’ve already installed your router. You
should complete steps 1 to 6 before proceeding with the instructions on this page.
The guide presents how to connect using your router’s Ethernet connection.
7
Start your Internet browser and type in the address
192.168.1.1
8
Click
Login
on the Enter Password screen
9
Click
Ignore
on the Change Password screen.
10
Click
Wizard Setup
.
11
Your broadband username is:
Plusnet:
username
@plusdsl.net
Force9:
username
@f9.co.uk
Free-Online:
username
@freeonline.net
Now enter your username
and password as confirmed
in your activation email. You
can confirm these by
checking your connection
details on our website.
12
Now click the radio button at the side of Nailed-Up Connection, then click
Next
.
13
Now click
Log on to the Internet!
Congratulations, you are now connected to broadband!
Your router is now connected to your broadband account. Any computer
connected to the router should now be able to browse the Internet.
Note that once these details have been set you don’t need to enter them again,
simply start your email application or web browser and you will be connected
automatically.
Troubleshooting
If the DSL light does not stop flashing after a minute check your telephone cable
and microfilters. You should only use the cables provided with your router. Ensure no
other broadband equipment is installed on your computer. For more help, view the
included Quick Start Guide, or the detailed manual included on the CD.
http://faults.plus.net
Instructions begin on other side
