Prestige 650H-E
26
Table 8 Adding/Editing Source and Destination Addresses
LABEL
DESCRIPTION
Address Type
Do you want your rule to apply to packets with a particular (single) IP address, a range of
IP addresses (e.g., 192.168.1.10 to 192.169.1.50), a subnet or any IP address? Select an
option from the drop down list box
Start IP Address
Enter the single IP address or the starting IP address in a range here.
End IP Address
Enter the ending IP address in a range here.
Subnet Mask
Enter the subnet mask here, if applicable.
5.8 UPnP Overview
Universal Plug and Play (UPnP) is a distributed, open networking standard that uses TCP/IP for
simple peer-to-peer network connectivity between devices. A UPnP device can dynamically join a
network, obtain an IP address, convey its capabilities and learn about other devices on the network.
In turn, a device can leave a network smoothly and automatically when it is no longer in use.
All UPnP-enabled devices may communicate freely with each other without additional
configuration. Disable UPnP if this is not your intention.
Windows ME and Windows XP support UPnP. See the Microsoft website for information about
other Microsoft operating systems.
Make sure you apply Microsoft’s UPnP security patch before enabling the
UPnP feature. Refer to the Microsoft website.
5.9 Configuring UPnP
Click
Advanced Setup
and then
UPnP
to open the
UPnP
screen.
Figure 23 UPnP
