Prestige 2002 Series
8
LED COLOR
STATUS
DESCRIPTION
On
The telephone(s) connected to this port is (are) in use.
Blinking
The telephone(s) connected to this port is (are) ringing.
Phone 1-2
Green
Off
The telephone(s) connected to this port is (are) not in use.
3 Setting Up Your Computer’s IP Address
For initial configuration, your computer must have an IP address in the
same subnet as 192.168.5.1.
Use this section to assign your computer a static IP address in the 192.168.5.2 to 192.168.5.254
range with a subnet mask of 255.255.255.0. This is necessary to ensure that your computer can
communicate with your Prestige. Record your original IP address settings so you can set your
computer back to them after you finish configuring the Prestige.
Your computer must have an Ethernet card and TCP/IP installed. TCP/IP should already be installed
on computers using Windows NT/2000/XP, Macintosh OS 7 and later operating systems.
3.1 Windows 2000/NT/XP
1.
In Windows XP, click
start
,
Control Panel
. In Windows 2000/NT, click
Start
,
Settings
,
Control Panel
.
2.
In Windows XP, click
Network Connections
.
In Windows 2000/NT, click
Network and Dial-up Connections
.
3. Right-click
Local Area Connection
and then click
Properties
.
4. Select
Internet Protocol (TCP/IP)
(under the
General
tab in Win XP) and click
Properties
.
