Connecting ISDN Line
Plug one end of your black ISDN phone line into the
socket on the rear panel of the Prestige labeled ‘ISDN’
and the other end into the ISDN wall jack.
Connecting Ethernet Cable
The Prestige supports two types of Ethernet connections.
The connection procedure differs for each one; follow the
one that is appropriate for your installation.
UTP
The UTP port is used to connect to a 10BaseT network.
10BaseT networks use Unshielded Twisted Pair (UTP)
cable and RJ-45 connectors that look like a big telephone
plug with 8 pins. Two types of gray Ethernet cables come
with the package:
•
Straight through cable (P/N 57-110-004290):
Connects your Prestige to a 10BaseT hub.
•
Crossover cable (P/N 57-011-208400): Connects
your Prestige to your computer directly without a
hub.
Warning
: If this cable is used to connect ISDN, it may
damage your Prestige.
AUI
The AUI port (the connector with 15 pins) is used to
connect the Prestige to a 10Base5 (thicknet) network.
If you have a 10Base2 network using BNC connectors and
thin coaxial cables, you will need a transceiver between
the AUI port and the 10Base2 cabling.
