1/2
Copyright © 2019 Zyxel Communications Corp. All Rights Reserved.
2
3
1
4
Connect the power cord to the
PMG2005-T20C and press the power
button.
Make sure the LEDs are on and
check the status.
Connect a computer to the LAN
port using the yellow Ethernet
cable.
Connect the fiber optic cable to
the PON port.
Warning! To avoid possible eye
injury, do NOT look into an
operating fiber-optic module's
connector.
POWER
3
2
LAN
POWER
ON
Quick Start Guide
Green
Green
Green
Off
Off
Off
Off
On: Power on and system ready
Off: Power off
On: Successful GPON fiber link
Blinking: Synchronizing with OLT (fiber terminal)
On: IP connection ready but no traffic
Blinking: Transmitting IP traffic
Off: Internet connection not ready
Green
On: Successful Ethernet link
Off: Ethernet connection is down. Reconnect
the Ethernet cable to the LAN port.
PMG2005-T20C
GPON HGU with 1-port GbE LAN
Hardware Connections
POWER
PON
INTERNET
LAN
Blinking: Transmitting/Receiving data on the
Ethernet link
Off: The fiber link is down.
Restart the PMG2005-T20C.
PON
1
INTERNET