1/2
Copyright © 2019 Zyxel Communications Corp. All Rights Reserved.
POWER
3
2
LAN
POWER
ON
PON
1
INTERNET
2
3
1
4
Connect the power cord to the
PMG1005-T20C and press the power
button.
Make sure the LEDs are on and
check the status.
Connect a computer to the LAN
port using the yellow Ethernet
cable.
Connect the fiber optic cable to
the PON port.
Warning! To avoid possible eye
injury, do NOT look into an
operating fiber-optic module's
connector.
Red
Green
Green
Off
Off
Off
Off
(Loss of Signal)
On: Power on and system ready
Off: Power off
On: Successful GPON fiber link
Blinking: Synchronizing with OLT (fiber terminal)
On: Not receiving an optical signal. Reconnect
the fiber optic cable to the PON port.
Off: Receiving a normal optical signal
Blinking: Transmitting/Receiving data on the
Ethernet link
Green
On: Successful Ethernet link
Off: Ethernet connection is down. Reconnect
the Ethernet cable to the LAN port.
PMG1005-T20C
GPON SFU with 1-port GbE LAN
POWER
PON
LOS
LAN
Off: The fiber link is down.
Restart the PMG1005-T20C.
Blinking: Receiving a weak optical signal.
Reposition the PMG1005-T20C.
Quick Start Guide
Hardware Connections