ZyXEL Communications PLA series, User Manual

Page: 13 / 66

Chapter 1 Introducing the PLA
PLA Series User’s Guide
13
1
Connect one powerline adapter to a router or switch on the first Ethernet network and assign a
Network Name (for example “Password1”) to this powerline adapter. Add additional powerline
adapters to your network by plugging them into your powerline outlets and assigning them
“Password1”. This completes the configuration of your first powerline network.
2
Connect another powerline adapter to a router or switch on the second Ethernet network and
assign a different
Network Name (for example “Password2”) to this powerline adapter. Again, add
additional powerline adapters and assign them “Password2”.
You now have two private networks on your powerline circuit. Information is not shared between
the two networks as only powerline adapters with the same
Network Name can communicate with
each other.