PK5001Z Quick Start Guide
5
settings.
If you do not set wireless security then anyone within range could use
your PK5001Z to access your network and the Internet.
Choose W PA-PSK wireless security if your wireless device supports it
as it is stronger than W EP. Otherwise choose W EP.
1
Select
Active
and click
Next
to continue. It i s strongly recommended
that
Enable OTIST
i s NOT selected.
See section
7
for more information.
2 C o n f i g u r e
your wireless settings i n the screen. Click
Next
.
3
If you select either
WEP
or
WPA-PSK
security (recommended), then
follow the directions to enter the appropriate key. Click
Next
to continue
and
Apply
to save your wireless LAN settings.
4
Check your configuration and write down your wireless LAN settings for
later use. Click
Finish
to complete and save the wizard setup.
5
Your Internet i s ready for you to use. Open your browser and navigate
to your favorite website.
4 Internet Connection Setup Using Advanced Settings
Use this section to set up your Internet connection manually if you do not
