P-871M User’s Guide
4
5
Use the included power adaptor to connect the
POWER
socket to a proper power source.
6
Push the power switch to the on position.
1.2 CPE Mode
1
Set the
CO/CPE
switch on the rear panel to the
CPE
side.
2
Use the included console cable to connect the
CONSOLE
port to your computer’s
COM
port for configuration.
3
Use the included yellow Ethernet cable to connect the
ETHERNET
port to your network device, such as a switch.
4
Over ISDN: Use the included gray cable with a RJ-45
connector to connect the
DSL
port to another P-871M in
CO mode.
Over POTS: Use the included gray cable with a RJ-11
connector to connect the
DSL
port to another P-871M in
CO mode.
5
Use the included power adaptor to connect the
POWER
socket to a proper power source.
3
1
2
4
5
6
CO
CPE
