P-791R v2 Support Notes
You can edit filter rule to accept or deny LAN packets from/to the IP alias 1/2
go through the P-791R v2 in SMT menu 3.2.1 as below:
Or by commands in
CLI
:
lan index [index number]
Usage: index number =1 main LAN
2 IP Alias#1
3 IP Alias#2
lan filter <incoming|outgoing> <tcpip|generic> [set#]
Usage: set#= the corresponding filter set number you’ve configured
lan save
•
IP Alias Setup
(1) Edit the first network in Web Configurator, Advanced Setup,
Network
-> LAN -> IP/DHCP Setup
by configuring the P-791R v2's first LAN IP
address.
Key Settings:
DHCP
Setup
If the P-791R v2's DHCP server is enabled, the IP pool for the clients can
be any of the three networks.
TCP/IP
Setup
Enter the first LAN IP address for the P-791R v2. This will create the first
route in the enif0 interface.
(2) Edit the second and third networks in
Network -> LAN -> IP Alias
by
configuring the P-791R v2's second and third LAN IP addresses.
53
All contents copyright © 2007 ZyXEL Communications Corporation.
