P-662HW-D Series Support Notes
Example
The following example shows how to dial to an ISP via the P-662HW-D and
then establish a tunnel to a private network. There will be three items that you
need to set up for PPTP application, these are PPTP server (WinNT), PPTP
client (Win9x) and the P-662HW-D.
(1) PPTP server setup (WinNT)
•
Add the VPN service from Control Panel ->Network
•
Add an user account for PPTP logged on user
•
Enable RAS port
•
Select the network protocols from RAS such as IPX, TCP/IP NetBEUI
•
Set the Internet gateway to P-662HW-D
(2) PPTP client setup (Win9x)
•
Add one VPN connection from Dial-Up Networking by entering the
correct username & password and the IP address of the P-662HW-D's
Internet IP address for logging to NT RAS server.
•
Set the Internet gateway to the router that is connecting to ISP
(3) P-662HW-D setup
•
Before making a VPN connection from Win9x to WinNT server, you
need to connect P-662HW-D router to your ISP first.
•
Enter the IP address of the PPTP server (WinNT server) and the
port number for PPTP as shown below:
59
All contents copyright © 2006 ZyXEL Communications Corporation.
