P-661HNU Series Support Notes
66
All contents copyright © 2010 ZyXEL Communications Corporation.
Step 5: From general tab select TCP/IP and click property
Step 6: Fill in your network IP address and subnet mask and click OK to finish.
Step 7: Station A now are able to connect to Station B.
2. Setup WEP
(Wired Equivalent Privacy)
Introduction
The 802.11 standard describes the communication that occurs in wireless
LANs.
The Wired Equivalent Privacy (WEP) algorithm is used to protect wireless
communication from eavesdropping, because wireless transmissions are
easier to intercept than transmissions over wired networks, and wireless is a
shared medium, everything that is transmitted or received over a wireless
network can be intercepted.
WEP relies on a secret key that is shared between a mobile station (e.g. a
laptop with a wireless Ethernet card) and an access point (i.e. a base station).
The secret key is used to encrypt packets before they are transmitted, and an
integrity check is used to ensure that packages are not modified during the
transition. The standard does not discuss how the shared key is established. In
practice, most installations use a single key that is shared between all mobile
