P-661H-D Series Support Notes
mask] the
rule
sys filter set destport [port#] [compare
type = none|equal|notequal|less|greater]
Set the destination port and compare type (compare
type could be 0(none)|1(equal)|2(not
equal)|3(less)|4(greater) )
sys filter set srcip [address] [subnet
mask]
Set the source IP address and subnet mask
sys filter set srcport [port#] [compare
type = none|equal|not
equal|less|greater]
Set the source port and compare type (compare
type could be 0(none)|1(equal)|2(not
equal)|3(less)|4(greater) )
sys filter set tcpEstab [yes|no]
Set TCP establish option
sys filter set more [yes|no]
Set the more option to yes/no
sys filter set log [type 0-3= none | match|
notmatch | both ]
Set the log type (it could be 0-3 =none, match, not
match, both)
sys filter set actmatch[type 0-2 =
checknext | forward | drop]
Set the action for match
sys filter set actnomatch [type 0-2 =
checknext | forward | drop]
Set the action for not match
sys filter set offset [#]
Set offset for the generic rule
sys filter set length [#]
Set the length for generic rule
sys filter set mask [#]
Set the mask for generic rule
sys filter set value [(depend on length in
hex)]
Set the value for generic rule
sys filter set clear
Clear the current filter set
sys filter set save
Save the filter set parameters
sys filter set display [set#][rule#]
Display Filter set information. W/o parameter, it will
display buffer information.
sys filter set freememory
Discard Changes
86
All contents copyright © 2006 ZyXEL Communications Corporation.
